Sales - Admin - Help
Technical Support & Designs

Victoria - Head Office
Andrew Sherriff
(03) 9331 5666
Mob. 0412 363 745

Queensland
Kelvin McBryde
(07) 3273 5383
Mob. 0403 280 410

New South Wales
Julie Warby
(02) 9675 1877
Mob. 0418 708 152

ACT, Canberra
Brian Aitchison
(02) 6247 4555
Mob. 0408 624 212

South Australia
Corey Gray
(08) 8339 1092
Mob. 0412 225 217

Western Australia
Peter Debeaux
(08) 9377 1322
Mob. 0408 926 967

Tasmania
Stuart Hamilton
(03) 6224 8884
Mob. 0418 126 162

Tubular luminaire ø 38mm IP 65 with high performance LED each 2W.
for directed illumination of handrails, facades and many other applications.
Other areas of use would be cold rooms down to -30°C without any difficulties. Connection directly to 240V mains supply, no separate power supply required!

Polymer luminaire ERFURT Longlife IP 65, incl. longlife-lamp.

This luminaire stands out for its durability. The Industrial ECG with a lifetime of up to 200.000 hours and the longlife-lamp with a lifetime of up to 80.000 hours together with the usual high NORKA quality, provide a high operating time of the lighting installation.

Cold room luminaire TURKU LED (to -30°C) IP 65.
Instant-light enables use with door contacts or motion detectors. This leads to a more energy efficient illumination of cold storages, cold rooms and many other like applications.

Ten NEW energy efficient, high output Luminaires as shown with this distinctive background, have been added to our growing range of specialised lighting products.

Additionally, in keeping with emerging Lamp technology, many of these NEW products incorporate unique Norka developed/produced/fully tested and guaranteed LED's, plus where appropriate, add-on exclusive Norka Beam Pattern changing, Fresnal Lens.

All Product Pages now include the 2010 Catalogue Pages that relate to each specific Product.

Refer to "Download"

Product Catalogue Pages

The Norka 2010 Catalogue is now available available from the

Request Information Page.

See under "Contact" Navigation Bar 

Triple-lamp luminaire, IP 65, protection class II, for T5 lamps, with two or three individual adjustable reflector tubes in customers choice. The use of longlife lamps together with Industry-ECG gives substantial extension of maintenance intervals. The luminaire MELBOURNE is therefore well capable to replace high bay luminaires with high pressure discharge lamps up to 400 W! Mounting via two stainless steel mounting brackets. The luminaire is ready for connection and comes with built-in ECG, two access covers and two cable glands

Twin tube luminaire Ø 60 mm each, made of PMMA impact strengthened for mounting on a wire rope. Connected directly to 240 V, 50-60Hz. 24 LED are mounted in each polymer tube. The luminaire can be switched separately 1/3, 2/3 or complete, alignment is possible by means of a scale. Mounting can be done on wire ropes of Ø 4 - 10 mm with the included twin mounting bracket. The quick locking system of the end cap is flush with the tube and provides for easy maintenance. Consequently luminaire HERNE LED 240 V is the ideal product for street illumination.

Surface mounted vandalism resistant luminaire, IP 44, class I, made from stainless steel with strengthened 4mm PC lamp diffuser and stainless steel end caps. Impact resistant up to 40 Joule and therefore applicable for prisons, detention cells and all vandal prone areas. Different lamp types T5 ECG, T8 ECG and low loss ballast are available. The curved profile of the luminaire prevents the placing of objects on the surface. The oval locking screws additionally avoid unauthorised opening and four rear mounting apertures secure the mounting of the luminaire. 

Polymer tubular luminaire Ø 60mm, up to IK69k, for Zone 2 and Zone 22 areas & available in 5 different lamp/physical sizes.

With the NORKA Linear-Fresnel lens technology the luminaire BERN LED 240V covers a wide range of applications.

Additional information is available from our Sales outlets as listed on the, Home page, plus the 
"Contact/Distributors" page. 

Aller Luminaire rail system - 
Dimmable ECG Gear
1,2 or 3 lamp versions with
high output Norka reflectors.
for mh's of up to 21m's. 

- energy-efficient 
- innovative 
- ease of assembly 
- functional & durable
- optimised lighting technology 
- maintainable without tools 
- as it's a Norka product, 
>it's future proof< 

To further complement our extensive list of Product Information, we have now added to each Product Page, the ability to obtain a unique, visual (PDF) Photometric Data-Output Report, for each displayed Product.

To obtain this Report, simply Click on the link next to the Illuminance Distribution Chart on any of the Product Pages.